HGO Series

It offers HGO series high pressure air line filters operating at 50 / 350 bar.

Filters are made of aluminum and have a weldless monolithic design.
They are robust, durable and reliable in design.
Having a large wall thickness and being put into use after being rigorously tested guarantees high performance operation.
All internal and external surfaces are highly anodized to prevent corrosion.

Models And Technical Information

MODEL INPUT CONNECTION CAPACITY (50 bar) MAXIMUM OPERATING PRESSURE (barg) ELEMANT DIMENSIONS mm
(m3 / hour) (scfm) MODEL A B C D E
HGO 100 1/4” 71 42 50 M25 106 119 30 88 201
HGO 300 1/2” 212 125 50 M50 106 119 30 88 201
HGO 600 3/4” 425 250 50 M100 106 119 30 88 201
HGO 850 1” 595 350 50 M150 123 140 39.5 103 357
HGO 1200 1” 850 500 50 M200 123 140 39.5 103 357
HGO 1600 1 1/2” 1600 942 50 M250 123 140 39.5 103 357
HGO 2500 2” 2500 1471 50 M2500 159 179 56 133 380
HGO 3000 2 1/2” 3000 1766 50 M3000 159 179 56 133 380


General Information

It offers HGO series high pressure air line filters operating at 50 / 350 bar.

  • Filters are made of aluminum and have a weldless monolithic design.
  • They are robust, durable and reliable in design.
  • Having a large wall thickness and being put into use after being rigorously tested guarantees high performance operation.
  • All internal and external surfaces are highly anodized to prevent corrosion

To calculate the maximum required flow rate, multiply the table flow rate value by the correction factor corresponding to your working pressure.

  • Class A elements should not be used in oil-saturated situations.
  • Class A elements should be replaced in accordance with the application for which they are to be used and/or at the end of each 6-month period of use to maintain efficient filtration.
  • Class A elements cannot filter certain gases such as carbon monoxide and carbon dioxide.
  • In case of any uncertainty, please contact Yıldız Industrial sales team.
  • Air filters are suitable for use with mineral and synthetic oils.
  • The housings mentioned above require only one filter element.
  • The flow direction is from inside to outside through the filter element, except for class A elements.
  • Manual purge is standard, electronic meter purge is optional.