DryAir DK Series

Our dryers, which are produced with a unique single block heat exchanger with blades designed from thick steel tubes whose durable, compact and efficient structure has undergone special improvement processes against rust, are considered as references in the dryer performance assessments on the market.

COOLER GAS TYPE HIGH PRESSURE DRYERS

Models And Technical Information

MODEL CAPACITY (*) CONDENSER FLOW RATE POWER Pipe Connection Parts (**) NOISE PRESSURE DROP DIMENSIONS mm WEIGHT (with box) EVACUATION
(m3 / hour) (cfm) m3 / hour kW BSP dB bar width length height Kg
DK 33 HP 33 19 100 0.25 3/8” 53 0.01 570 440 490 30 1
DK 38 HP 38 22 370 0.25 3/8” 52 0.02 570 440 490 32 1
DK 54 HP 54 32 340 0.25 3/8” 53 0.03 570 440 490 32 1
DK 87 HP 87 51 370 0.28 3/4” 52 0.02 760 490 530 54 1
DK 135 HP 135 79 340 0.35 3/4” 51 0.05 760 490 530 55 1
DK 190 HP 190 112 410 0.58 3/4” 53 0.06 760 490 530 57 1
DK 218 HP 218 128 800 0.66 3/4” 58 0.08 760 490 530 62 1
DK 256 HP 256 151 980 0.8 1” 59 0.13 780 575 730 88 1
DK 355 HP 355 209 980 1.1 1” 63 0.16 780 575 730 92 1
DK 412 HP 412 242 980 1.3 1” 63 0.22 780 575 730 92 1
MODEL CAPACITY (*) EVACUATION AIR FLOW POWER Pipe Connection Parts (**) DIMENSIONS mm WEIGHT (with box) EVACUATION
(m3 / hour) (cfm) m3 / hour kW BSP width length height Kg
DK 461 HP 461 271 980 1.1 1 1/2” 620 730 1040 129 1
DK 577 HP 577 339 980 1.3 1 1/2” 810 760 1300 168 1
DK 705 HP 705 415 980 1.4 1 1/2” 810 760 1300 225 1
DK 904 HP 904 532 2250 1.9 1 1/2” 810 760 1300 240 1
MODEL CAPACITY (*) CONDENSATE AIR FLOW POWER Pipe Connection Parts (**) DIMENSIONS mm WEIGHT (with box) EVACUATION
(m3 / hour) (cfm) m3 / hour kW BSP width length height Kg
DK 1149 HP 1149 676 2250 2.4 2 1/2” 870 770 1500 278 2
DK 1305 HP 1305 768 2250 2.6 2 1/2” 870 770 1500 295 2
DK 1648 HP 1648 970 2250 2.6 2 1/2” 870 770 1500 348 2
DK 1873 HP 1873 1102 5000 3 2 1/2” 1180 1070 1600 453 2
DK 2309 HP 2309 1359 4800 4.3 2 1/2” 1180 1070 1600 456 2
DK 2444 HP 2444 1438 7000 5 2 1/2” 1180 1070 1600 532 2
DK 2932 HP 2932 1726 7000 5.6 DN60 1180 1070 1600 536 2


General Information

  • Our dryers, which are produced with a unique single block heat exchanger with blades designed from thick steel tubes whose durable, compact and efficient structure has undergone special improvement processes against rust, are considered as references in the dryer performance assessments on the market.
  • The heavy-duty steel structure of dryAir DK HP series heat exchangers makes the unit highly reliable and long-lasting.
  • By welding louvered copper folds with special design into steel tubes, 100% contact between the air and the cooling circuit is established and therefore the design reaches the most modern performance and cooling efficiency levels.
  • The single block structure of the heat exchanger helps the unit to become compact and ensures that pressure losses are kept at very low levels.
  • Surface area with heat exchange 10 to 20 times larger than competitors
  • Direct cold transfer from cooler gas to compressed air
  • Separator without any external connector to saving equipmenvt
  • Powerful and durable heat exchanger
  • Special anti-rust improvement
  • Excellent thermal insulation
  • Small volumes of refrigerant gas
  • Bi-directional centrifuge thanks to the lower fin
  • Airway reserved only for compressed air
  • Water condensation with gravity effect
  • Special anti-return system
  • Separator integrated into the system
  • Dual valve regulation that allows filling the heat exchanger and heating up to the maximum temperature level
  • Fast start and reaction times
  • High quality safety tests for potential leakage problems
  • Tecumseh trademark hermetic compressors are offered in DryAir DK 33HP-577HP models and spiral compressors are offered as standard in DryAir DK 705HP 2932HP models.
  • Discharge with standard electronic meter
  • Front filter protecting the drain valve
  • Pneumatic support in three-phase dryer models
  • Easy access and maintenance